Difference between revisions of "Heat transfer module - Fluid Dynamics 2019"

From UMaine SECS Numerical Modeling Laboratory
Jump to: navigation, search
(Heat Transfer in a Lava Lamp)
Line 8: Line 8:
 
Until things start moving, conduction is the dominant heat transfer process in our lava lamp system.
 
Until things start moving, conduction is the dominant heat transfer process in our lava lamp system.
 
*'''Conduction''', defined as '''κ∇²T''' depends on:
 
*'''Conduction''', defined as '''κ∇²T''' depends on:
**thermal diffusivity of the material through which heat is moving
+
**thermal diffusivity of the material through which heat is moving (κ)
**thermal gradient
+
**thermal gradient (∇²T)
  
 
The density of the wax is inversely related to temperature, meaning that at higher temperatures, the wax is less dense. When the density becomes lower than the density of the liquid in the lava lamp, the wax will tend to float upward.  
 
The density of the wax is inversely related to temperature, meaning that at higher temperatures, the wax is less dense. When the density becomes lower than the density of the liquid in the lava lamp, the wax will tend to float upward.  
Line 17: Line 17:
 
Wax reaches critical density (less than liquid) and tends to float upward. That movement of wax, and thus heat, introduces velocity into the system and is a process that is referred to as advection.
 
Wax reaches critical density (less than liquid) and tends to float upward. That movement of wax, and thus heat, introduces velocity into the system and is a process that is referred to as advection.
 
*'''Advection''', defined as '''v∇T''' depends on:
 
*'''Advection''', defined as '''v∇T''' depends on:
**velocity of the fluid
+
**velocity of the fluid (v)
**thermal gradient
+
**thermal gradient (∇T)
 +
 
 +
 
  
  
Line 29: Line 31:
 
   ∂T/∂t = conduction + advection + production
 
   ∂T/∂t = conduction + advection + production
  
In this scenario, we do not consider the production term ('''A''').  
+
The production term ('''A''') represents internally generated heat energy and we do not consider it in this lava lamp scenario. It becomes important in systems such as glaciers, when internal strain heating is an important source of heat.
  
 
''Peclét Number'':
 
''Peclét Number'':
Line 49: Line 51:
  
 
*'''Convection''' depends on driving forces and resisting forces.  
 
*'''Convection''' depends on driving forces and resisting forces.  
**Driving forces:  
+
**Driving forces (when these terms are dominant convection grows):  
 
***Acceleration due to gravity (g)
 
***Acceleration due to gravity (g)
 
***Density (ρ)
 
***Density (ρ)
Line 55: Line 57:
 
***The volume coefficient of thermal expansion (α)
 
***The volume coefficient of thermal expansion (α)
 
***The height of the convection cell (d)
 
***The height of the convection cell (d)
**Resisting forces:  
+
**Resisting forces (when these terms are dominant convection decays):  
 
***Viscosity (μ)
 
***Viscosity (μ)
 
***Thermal diffusivity (κ)
 
***Thermal diffusivity (κ)
  
*When numerator terms are dominant convection grows
 
*When denominator terms are dominant convection decays
 
 
At some critical Rayleigh (Racr) number (dependent on the system), the convection regime shifts.
 
At some critical Rayleigh (Racr) number (dependent on the system), the convection regime shifts.
 
 
  
 
=='''Heat Transfer in Ice Stream Shut Down and Start (based on Joughin and Alley, 2011)'''==
 
=='''Heat Transfer in Ice Stream Shut Down and Start (based on Joughin and Alley, 2011)'''==

Revision as of 18:27, 12 March 2019

Heat Transfer in a Lava Lamp

When you flip on the light in a lava lamp, heat from the bulb works slowly to warm up the wax (or ‘lava’). This kind of heat transfer is called conduction, or movement of heat from one place to another. Heat energy flows from high heat (light bulb) to low heat (wax), and the gradient is the driver of conductive heat transfer. This heat transfer can be represented by an equation.

Image: 200 pixels Image: 200 pixels Image: 185 pixels

Until things start moving, conduction is the dominant heat transfer process in our lava lamp system.

  • Conduction, defined as κ∇²T depends on:
    • thermal diffusivity of the material through which heat is moving (κ)
    • thermal gradient (∇²T)

The density of the wax is inversely related to temperature, meaning that at higher temperatures, the wax is less dense. When the density becomes lower than the density of the liquid in the lava lamp, the wax will tend to float upward.

Image: 200 pixels Image: 190 pixels

Wax reaches critical density (less than liquid) and tends to float upward. That movement of wax, and thus heat, introduces velocity into the system and is a process that is referred to as advection.

  • Advection, defined as v∇T depends on:
    • velocity of the fluid (v)
    • thermal gradient (∇T)



Heat Transfer Equation:

The heat transfer equation brings these aforementioned processes together to describe how heat changes through time (∂T/∂t). It is defined as:

 ∂T/∂t = κ∇²T + v∇T + A
 ∂T/∂t = conduction + advection + production

The production term (A) represents internally generated heat energy and we do not consider it in this lava lamp scenario. It becomes important in systems such as glaciers, when internal strain heating is an important source of heat.

Peclét Number:

The Peclét Number is a dimensionless number which indicates whether conduction or advection dominates the system.

 Pe = uL/κ

where u = flow velocity, L = characteristic length Height of lava lamp, κ = thermal diffusivity

  • Low peclet regime- dominated by heat transport by conduction
  • High peclet regime- dominated by heat transport by advection

With the movement of wax in the upward direction away from the heat source at the bottom of the container and into a cooler material the wax density increases again (more than liquid). This wax density increase causes the wax to sink back down to the bottom of the container towards the heat source. This process is called convection.

Image: 210 pixels

Rayleigh Number:

The Rayleigh Number is a dimensionless number used to describe whether convection grows or decays.

 Ra ≡ (gρΔTαd³)/μκ
  • Convection depends on driving forces and resisting forces.
    • Driving forces (when these terms are dominant convection grows):
      • Acceleration due to gravity (g)
      • Density (ρ)
      • The temperature difference between the bottom and top of the convection cell (ΔT)
      • The volume coefficient of thermal expansion (α)
      • The height of the convection cell (d)
    • Resisting forces (when these terms are dominant convection decays):
      • Viscosity (μ)
      • Thermal diffusivity (κ)

At some critical Rayleigh (Racr) number (dependent on the system), the convection regime shifts.

Heat Transfer in Ice Stream Shut Down and Start (based on Joughin and Alley, 2011)

Stop and start of ice streams is dependent on:

  • Thinning (steepens basal temperature gradients)
  • Basal freezing (puts on the brakes for a system)
  • Thickening (build up traps geothermal heat)
  • Ice stream activation & the cycle is repeated

Watch the video below to walk through the steps of ice stream shut-down and speed-up, and see how this relates to the heat transfer equation introduced above.

Further reading:

Different theories exist for ice stream shut down, and here we present varying hypothesis. Please note that the behavior we model in our video is based upon the hypothesis of Joughin and Alley.